Kaldnes K3 media is similar in application to Kaldnes K1 media, in that the constant chaotic movement of the air from your pump causes the media to self-clean and thus requires no maintenance.

Since the development of the Kaldnes Moving Bed process and its successful introduction into the waste water treatment industry in 1991, Kaldnes K1 media has become the industry standard throughout the world. However Kaldnes has not been idle, as they have continued their extensive research and development program to further improve the efficiency of their process over the last 12 years. The BioChip is the result of this program and is much more than simply a different shaped media. Although the total protected surface area is more than 2.4 times higher than K1, this is only part of the story. The main difference is that the protected area or quiet zone in the BioChip is designed to be the perfect environment for micro animals, not just bacteria. The extremely quiet zones created by the hydrophilic layer protecting every cavity in the BioChip is critical to allow these micro animals to flourish. With other types of media, they will be flushed out. These micro animals feed on small particles such as fish waste, dead bacteria and algae. There are many types of these micro animals as you can see in our close-up photographs. Consider that the Vortecilia (reference fig 1) are filtering 10,000 times their own volume per hour and are feeding on particles up to 5 microns in size! Once fully colonized, the BioChip contains an army of these micro animals, all filtering tens of thousands of times their own volume every hour. The result - gleaming healthy water, high in oxygen content and low BOD will follow.